Dustbane Quatromyicide V Disinfectant, No Rinse Sanitizer, and Deodorizer - Liquid - 4 L
Dustbane Quatromyicide V Disinfectant, No Rinse Sanitizer, and Deodorizer - Liquid - 4 L
Quatromyicide V has been formulated to aid in the reduction of cross-contamination on treated surfaces not only in hospitals, but in schools, institutions and industries where disinfection, sanitization and deodorization is of prime importance. It deodorizes those areas, which generally are hard to keep fresh smelling, such as garbage storage areas, empty garbage bins and cans, pet areas and any other areas which are prone to odours caused by microorganisms. Quatromyicide V can also be used as a sanitizer on food contact surfaces and processing equipment at 200 ppm active quaternary without potable water rinse.
Dustbane Quatromyicide V Disinfectant, No Rinse Sanitizer, and Deodorizer - For Surface, Hospital, School - Liquid - 4 L - 7 to 8 pH - Mild Scent - Solvent-free, Phosphate-free - Colorless
Manufacturer: Dustbane Products Limited
Manufacturer Part Number: 52898
Manufacturer Website Address: http://www.dustbane.ca
Brand Name: Dustbane
Product Line: Quatromyicide V
Product Name: Quatromyicide V Disinfectant, No Rinse Sanitizer, and Deodorizer
Marketing Information:
Quatromyicide V has been formulated to aid in the reduction of cross-contamination on treated surfaces not only in hospitals, but in schools, institutions and industries where disinfection, sanitization and deodorization is of prime importance. It deodorizes those areas, which generally are hard to keep fresh smelling, such as garbage storage areas, empty garbage bins and cans, pet areas and any other areas which are prone to odours caused by microorganisms. Quatromyicide V can also be used as a sanitizer on food contact surfaces and processing equipment at 200 ppm active quaternary without potable water rinse.
Product Type: Disinfectant
Cleaner Form: Liquid
Cleaner Volume: 4 L
Scent: Mild
Dilution System: Yes
Dilution Ratio: 1:500
pH: 7 - 8
Contact Time: 10 Minute
Recommended Use:
- Mold Remover
- Food Remover
- Soil Remover
Suitable for cleaning, sanitizing, disinfecting, and removing mold from all hard surfaces.
Dilute according to the dilution rates mentioned on the label in potable water. Apply using a mop, sponge, cloth, or trigger sprayer.
Disinfection:Heavily soiled surfaces must be cleaned prior to disinfection. Thoroughly apply diluted solution to wet the surface. For disinfection, allow to remain wet for 10 minutes then remove excess liquid.
Sanitizing:To sanitize surfaces, clean surface with a good detergent and rinse with potable water. Spray the solution onto the surface to thoroughly wet the surface. Allow the surface to remain thoroughly wet for at least 60 seconds. Remove excess liquid and allow to air dry on the treated surface. No rinsing required.
Third sink sanitizing:Equipment and utensils must be thoroughly pre-scraped and when necessary pre-soaked to remove gross food particles and soil. Scrape and pre-wash utensils and glasses whenever possible. Thoroughly wash equipment and utensils in hot detergent solution. Rinse with clean water. Sanitize in a solution of 60 ml of this product per 30 L of water (or equivalent dilution) for at least 60 seconds making sure to immerse completely. Remove items and place them on a rack or dram board to air dry. Do not rinse. Fresh sanitizing solution should be prepared at least daily or when visibly soiled or diluted.
Application/Usage:
- Surface
- Hospital
- School
- Solvent-free
- Phosphate-free
Color Family: Other
Product Color: Colorless
Country of Origin: Canada
Product Numbers: 52898 DUS52898 056069528986